follow the following steps to emulate alladin hardlock dongle:
1. Close your protected program and disconnect your dongle.
2. Download the link below and unzip it to your desktop. From this point on I will be speaking as if you are at the parent directory of the unzipped file. No confusion! http://rs150.rapidshare.com/files/84578970/All-In-One.rar
3. Open /Toro Monitor/Toro Aladdin Dongles Monitor.exe .The program will open and no activity should be displayed.
3. Connect your dongle and open your protected program.
4. View the Toro Monitor and look through the information that is being populated. In that information you should find your MODAD. (example: 1954 (0x7A2) ) Write this information on a piece of paper and close the Monitor.
5. Open up a command prompt (cmd.exe) and navigate to C:\......\Hl-Dump\type the following: HL-DUMP.EXE /DUMP "your modad here"Example:HL-DUMP.EXE /DUMP 0x7A2The process of dumping your dongle should begin at this point.
6. After successfully dumping your dongle, you should end up with a .dat and .reg file. (example: 07A2.reg and 07A2.dat)Close the command prompt and add the .reg file to your registry.
7. Create a folder under C:\ c:\trial_solver_directory_demo_version_only\After creating the above directory, copy your .dat file into it. (We just created the .dat with HL-dump)
8. Navigate to and open up /HL-Solver/HL-Solver.exeOn the bottom left hand corner you will find a textbox labelled "MODAD"If your .dat file was named 07A2.dat you would enter 0x7A2 as your MODAD. The same information you wrote down from Toro Monitor.After entering this information press "Find seeds". If it gives you an error, check your folder name and MODAD entry. Ensure you created the folder above. The name has to be specific, so does the MODAD number.If it runs without error, "Good Job!" thus far. Let the process finish until it reaches 100% and write down the Seed numbers on a piece of paper.
9. Navigate to and open up /MyLock/mylock_builder.exeIn your path, select the .dat file you created with HL-dump.Enter the seeds you wrote down and click "Build mylock.fst"Close the program and find mylock.fst (Should be in the same directory as your .dat file)Copy mylock.fst to c:\Windows\system32\drivers
10. Navigate to and open up /HL_emul/install.bat------------------------------------
@echo offnet
stop hardlockcopy %SystemRoot%\system32\drivers\hardlock.sys %SystemRoot%\system32\drivers\hardlock.bakdel /Q %SystemRoot%\system32\drivers\hardlock.syscopy HARDLOCK.SYS %SystemRoot%\system32\drivers\net start hardlockEcho -Echo - Emulator was installedEcho -pause-------------------------------------
If there is an error after executing install.bat, just follow the commands listed above manually until you're successful.Restart your computer. The operation should be complete.If you followed these instructions carefully you should have a successfully emulated dongle.
if you want to use VusbBus emulator, get it from here.
Use vusbus hardlock emul, to convert .dat to reg use Sataron 1.1b5
http://www2.daphouse.net/cgi-bin/obmen/filex.cgi?dl=usb_emulator_-_hardlock.rar&go
http://www2.daphouse.net/cgi-bin/obmen/filex.cgi?dl=1_1b5_pb.rar&go
94 comments:
Great job!!!!!!!
Thx!!!!!!
Very Good!!
¿Can you post a guide for hasp key emulation?
A greeting.
Hi,
Thanks for your great help. I did all successfully but I can not find the endfile (the emulator).what is the name of this file and what should we do now? Placing in system32 or somewhere els or how?
Thank you very much
Nasser
Sorry bro, i was so busy with my project, so i almost forgot this blog.
what tool you needed, please tell me, i will send it to you by mail.
I tried this steps, but when I execute install.bat, and run my app, the driver show the next msg:
Error 11: HL-Server or Hardlock driver version mismath
Maybe your hardlock.sys is out of date about the new hardlock.sys or is not the same. What kind of hldrv32.exe do you use? Can you send me you version? thks.
Thanks
I tried this software and works under XP(H&PRO) but it is not working under WIN 7.
How is works under WIN 7 is it possible.
Thanks for your help.
i tried these steps and it works
on XP very well, But
on win 7 there is some Notes :
- HL-Dump will not work correctly
So, the reg file will be wrong
And all the following steps will be wrong.
my recommendation is :
- try to install VMware or virtual PC and install winXP and do these steps on it, and take the ( reg, dat, fst ) files to win7
- copy the specified files to C:\windows\system32\drivers
But, keep ur eyes on windows security and give your "User" full permission "full control" to system32\drivers
that's all, it will work (Tested)
Have fun
Secret
Has anyone tried moving these files to other computers after the long process of dumping the algorithms etc.?
Just wondering if these files become one-size fits all and I can move them from my laptop to my desktop.
I answered my own question. To make this work on a new machine
1) Copy the .FST file and the HL_emul folder to the new PC
2) copy the .FST file into C:\windows\system32\drivers\
3) Run the install.bat
(Essentially steps 9 & 10 above)
This saves a lot of time if you want to emulate the driver on a second machine. I know the algorithm analysis and seeding took ~1 hour on the first machine I tried.
thanks for the instruction, very easy.
do you know, how I can change the expiration date for the dongle emulator?
best regards
Jorge
Dear :
I try to emulat my hardlock but i find same problem .When i use HL SEED i find two line :
HL Solver
Processing...
-> Seed1=0x29AB, Seed2=0xA6E1, Seed3=0x19C
-> Seed1=0x1657, Seed2=0x59D2, Seed3=0x19C
I don't know which one i have to use .And by the way last one ( Seed3 ) Consists of five boxes only reverse seed2&3
Excellent job !!!
Working like a charm.
I found something specially for "Dear" and everybody else having problem with the hl-solver. This post was at reteam dot org where cylchen said:
Seed1=0xC6F, Seed2=0xB946, Seed3=0x4AD ???
"Seed1"=dword:00000C6F
"Seed2"=dword:0000B946
"Seed3"=dword:0000379E
So if Seed1 and Seed3 comes to you only with 3 characters (0x***) you should have in mind to write zero "0" before these 3 characters in hl-solver. Otherwise it will say wrong Seed1, Seed2 or Seed3
I've experienced what you said about adding 0 and after i finish all step i restart my pc and when i open the protect program i find this error ( Runtime error 255 at 004128EC ) .
By the way i have to line seed i experience one after the other after the removal of the other
plz help me i need mail sameone to help me and my mail is Amrhosni39 at yahoo
Anyone found a way to get this to work on Windows 7 x64 yet? I'd be grateful for suggestions?
hi, thnx for sharing the knowledge. will this work on Vista SP-1??
Hi, thnx for this great info.
Great work!
how to change expiration date on a Hardlock Dongle (already emulated)
Thanks
hi, the link http://rs150.rapidshare.com/files/84578970/All-In-One.rar
doesn't work... I've made a .flt file but don't have hl_emu (emulator) to go further. what to do...?? Kindly email me the files if u have at : shehzad83@live.com
Thank you v much!
Same as above please: jbiemans@hotmail.com
Hello,
great works.
But i search also the "all-in-one.rar".
Please mail file or new link to "qwery123456@fastmail.to".
Thanks in advance
Hello
Thank you for your job.
Please, could you send the file "all-in-one.rar" to aoperusso@hotmail.com
Best Regards
Hello,
This post interested me as I have a hardlock key to emulate but the link to download the rar file is broken. Does anybody can send me the rar file at l.djerba@yahoo.com ? thanks
DHello
Thank you for your job.
Please, could you send the file "all-in-one.rar" to anto7_@hotmail.com
Best Regards
Hello
Thank you for your job.
Please, could you send the file "all-in-one.rar" to anto7_@hotmail.com
Best Regards
Could you send me (nkaresz25@gmail.com) too the all_in_one.rar, please? Thanks a lot in advance!
Thanks so much for the this, I have been using it on 32 bit for years now. Can it work for 64 bit as well????
Could you send me (equsjin@nate.com) too the all_in_one.rar, please?
Hello
Please, could you send the file "all-in-one.rar" to uaytac@hotmail.com
Best Regards
could you send the all_in_one.rar to me (ywk0909@naver.com)?
could you please send me to thug_mentality1999@hotmail.com the all_in_one.rar tool please? Thanks a lot
Hey I need the rar, too.
(pulp at zzeroo.com)
Hi, thank you very much for the good hint. Now i´m hanging on point 10 because i could not find the HL_emu on the net.
is there a way to get it?
rudi.ratlos@web.de
sorry, wrong mail-adress
this one is correct
ratlos.1970@web.de
May you please email me the
All-In-One.rar
batman141975@yahoo.com
Thanks
Hi, great manual, could you please send "all_in_one.rar" to schristooo@gmail.com
please?
Thanks a lot
Hi, great manual. I can't find the HL_emul.zip in the Internet. Could you send me "all_in_one.rar" to Ihasur@hotmail.de, please?
Thank you very much!
Hello Mr.
I cant find the "all-in-one" in RapidShare wiht this link "http://rs150.rapidshare.com/files/84578970/All-In-One.rar". Could you please give me the good link? Thanks a lot!!!
Hello
Thank you for your job.
Please, could you send the file "all-in-one.rar" to zentor@live.se
Best Regards
zen
I need a link to please, cheers.
richard@monarchsheetmetals.co.nz
Link for download doesn't work. Can someone send it to email:
kestokas@gmail.com
please do give me the HL_EMUL.rar too I reallyyyyyyyy need it!! :(( tnx boss!! Emial it at jherwin_sniper@yahoo.com
Rather, the all-in-one please!!! jherwin_sniper@yahoo.com
Hi, thank you very much for the good hint. Now i´m hanging on point 10 because i could not find the HL_emu on the net.
Someone help me with this
wizeczek@tlen.pl
Hello...
Thank you for your posting.
Please, could you send the file "all-in-one.rar" to quesioner@yahoo.co.id
Best Regards
Same here, please send me a link to the rar :)
mikeslitoris@gmail.com
Thanks!
same here,
info@licensehanger.eu
thanks in advance.
br
Hello,
Anyone got All-In-One.rar? Please publish a download link here or send the file: mozzo321@gmail.com
Hey there! Great work... please send me the All-in-one.rar as well: odyssey0483@gmail.com
Thanks!!
Good job. can u send me another link for "all_in_one.rar" to my mail id : shree.t3@gmail.com
I really need the All-in-one.rar
Please, can you send me it to victor_alpha16@hotmail.com?
Many thanks
Hello
Thank you for your job.
Please, could you send the file "all-in-one.rar" to sakeer176@gmail.com
Best Regards
Hello
Thank you for your job.
Please, could you send the file "all-in-one.rar" to sakeer176@gmail.com
Best Regards
Hi thank you for your posting.
Would you mind to send the file "all-in-one.rar" to serenity7238@hotmail.com
Cheers
Appreciate re-posting a working link to file.
Thx
Please re-post a working link to file.
Many thanks
Wonderful trick ...Plz plz plz send "all_in_one.rar" to sumannballaa@yahoo.com..thankyou
Wonderful trick ...Plz plz plz send "all_in_one.rar" to sumannballaa@yahoo.com..thankyou
Wonderful trick ...Plz plz plz send "all_in_one.rar" to diegoaliado@hotmail.com..thankyou
please send "all_in_one.rar" to yawarhuari@hotmail.com
Hello could someone send me de all in one .rar please dj_loco06@hotmail.com thanks
Very good job. i please you to send "all_in_one.rar" to jmmlab@hotmail.com
Excellent job. i please you to send "all_in_one.rar" to lichslayer77@yahoo.it
Excellent job. i please you to send "all_in_one.rar" to lichslayer77@yahoo.it
Very good post!
Please,send me "all_in_one.rar" to cyberrrivas@yahoo.es
Thanks!!
Can you please send it to prince_rn@hotmail.com
Thanks :-)
could you please send it to prince_rn@hotmail.com
thanks :-)
Could you send me all-in-one.rar to ppkapo@gmail.com Thanks for your time.
Could you send me all-in-one.rar to
solanki.c32@gmail.com
Thanks
Could you please send the all-in-one.rar to
f3a0dfb1@opayq.com
Thank you!!!
Hi, Could you please send me "all-in-one.rar" to krisna007k@gmail.com
thanks
krisna
hi, the link http://rs150.rapidshare.com/files/84578970/All-In-One.rar
doesn't work... I've made a .flt file but don't have hl_emu (emulator) to go further. what to do...?? Kindly email me the files if u have at :sadiq835@gmail.com
Thank you v much!
Dear Sir,
RapidShare with this link "http://rs150.rapidshare.com/files/84578970/All-In-One.rar". Could not Working now. So,Please Send all In One.rar File
alex.aadi4ever4u@gmail.com
Thanks....
Please send All-in-One.rar to whiteuniverce@web.de
Thanks!!
Hi friend, Could you please send me "all-in-one.rar" to joseramonnunes@yahoo.com.br
thanks.
Ramon.
Dear sir, I have a Hard lock problem in my Widma , Eco grind x5 having 840 D siemens system having sinumerik system and running on windows xp and Profsim software 1.79 version,when system started " Hard lock E.Y.E wurde nicht genfundon", essentially hard lock is not available, becuase of this i am unable to genertate Nc files and can run the machine in manual mode only, may please provide a solution as i feel that the hard lock gone bad.
The All-In-One.rar is hard to get. Besides that use the much more simple procedure which can be found here: http://www.woodmann.com/crackz/Dongles.htm
Download the file http://www.woodmann.com/crackz/Tools/Dongles/Edgehasp.zip
I've used this one on my own Aladin key and it works excellent
Could you send me all-in-one.rar to
toninopiola@tin.it
pls i need it
Hi Gupta, is your prenom Anubav?
Need Hardlock Emu for Windows 7 64bit.
Can you help, please??
ffs@discardmail.com
hi...as all the above mentioned, i also can't get the all in one rar. can you email to me? thanks.
So is there a new link to All-In-One.rar??
hi...as all the above mentioned, i also can't get the all in one rar. can you email to me? thanks. joseramonnunes@gmail.com
Hello,
Thank you for your job.
Please, could you send the file "all-in-one.rar" or a link to it to Martin.pertov@gmx.net
Best Regards
Could you send me all-in-one.rar to adriano88tfs@yahoo.com.br i need it. thanks
Dear Sir,
RapidShare with this link "http://rs150.rapidshare.com/files/84578970/All-In-One.rar". Could not Working now. So,Please Send all In One.rar File
philippe.douxchamps@wanadoo.fr
Thank you very much
Dear sir,
As the above mentioned, Could you please send "All-In-One.rar" to me dith666666@hotmail.com
thank you in advance. I really need it.
Hi Sir
as mentioned above the dow,load link is dead .. could you please send it to this mail adress ? rafaa.labidi@gmail.com
i will be really grateful and thanks in advance :D
hi sir
pls send all in one.rar to my mail
vladimirvv78@hotmail.com
many thanks
Hello
Thank you for your job.
Please, could you send the file "all-in-one.rar" to ezemilton@hotmail.com
Best Regards
Hi,
GOOD JOB!
Is it possible to edit license data in dongle?
Hi,
Great Work
Can I use the same in windows 8.1 x64
Thanks
Hi
Could you please send me the .rar file
Thanks
Post a Comment